Switchback Second Seat Adapter KitUpdated 4 hours ago
First 10 minutes
New to the Switchback Second Seat Adapter Kit? Tap any step to jump straight into the configuration of Double Mode with Switchback Seat.
Steps for configuration of Double Mode with Two Car Seats can be found below.
Safety Warnings
+−
Never leave children unattended. Failure to follow these warnings and instructions could result in serious injury or death.
- Second seat adapter kit for use on Veer &Roll stroller frame only. Not for use on &Jog jogging frame or any other Veer frame or adapter.
- The maximum recommended loads are 50 lbs. (22 kg) in the rear seat, 40 lbs. (18 kg) in the front seat, 15 lbs. (7 kg) in the basket, and 11 lbs. (5 kg) in the basket pocket. Excessive weight may cause a hazardous unstable condition.
- Ensure that all locking devices on the &Roll stroller frame are engaged before use.
- To avoid injury, ensure that your child is kept away when unfolding and folding this product.
- Do not let your child play with this product.
- Always use the restraint system.
- Check that the pram body, seat unit, or car seat attachment devices are correctly engaged before use.
- This product is not suitable for running or skating.
- Never use an infant car seat adapter as a handle to lift the &Roll stroller frame.
- Never place an infant car seat into this car seat adapter before you have firmly attached the car seat adapter to the &Roll stroller frame.
- Always verify the adapter is correctly installed onto the &Roll stroller frame before installing an infant car seat.
- Weight limitations: recommended only for infants within the height and weight limits of infant car seats specified in the infant car seat manual.
- Always use the infant car seat restraint system as recommended by the manufacturer.
- Never use this product if there are any missing or broken parts. Contact Veer for replacement parts and never use substitute parts.
- The &Roll stroller frame with an infant seat attached does not replace a cot or a bed. Should your child need to sleep, place them in a suitable pram body, cot, or bed.
- In double infant car seat mode only, discontinue infant car seat usage when the child's weight exceeds 22 lbs. (10 kg). This does not apply to configurations that include one infant car seat and one Switchback Seat.
Switchback Second Seat Adapter Kit overview
+−
About this kit
The Switchback Second Seat Adapter Kit turns your Veer &Roll Stroller Frame into a double stroller. It is compatible with the Veer Switchback Seat, Veer Bassinet, or an infant car seat using brand-specific adapters.
For use with the &Roll stroller frame only. Not compatible with the &Jog jogging frame or any other Veer frame.
Configurations
There are endless configurations to choose from when using the Switchback Second Seat Adapter Kit. Click here to view a list of configurations.
What's in the box
This kit includes the lower post adapters and upper riser adapters needed to mount a second seat position to your &Roll Stroller Frame.
If you plan to use an infant car seat in double mode, you will also need brand-specific infant car seat adapters, sold separately. One set is required per car seat. Visit goveer.com to find the right adapter for your car seat brand and confirm current availability.
Compatible infant car seats
This kit works with most major infant car seat brands via their respective adapters (sold separately). Handle preparation varies by brand before attaching:
- Raise handle to highest position: Nuna, Maxi-Cosi, Graco, Baby Jogger, Peg Perego, UPPAbaby
- Lower handle to lowest position: Britax, Cybex (Cloud Q not compatible), Clek, Chicco
For a complete and up-to-date list of compatible models, visit goveer.com.
Double Mode with Switchback Seat
+−
Use this configuration to attach one infant car seat (rear/upper position) and the Switchback Seat (front/lower position). Always secure the &Roll Stroller Frame before attaching any components.
Secure &Roll Stroller Frame
Press gently on the brake pedal to lock the rear wheels before attaching any components.
Green indicator = unlocked. Red = locked.
Attach lower post adapters
Attach lower post adapters to your &Roll stroller frame and flip latch to close.
Listen for audible click. Pull up on adapters to confirm secure connection.
Attach upper riser adapters
Attach upper riser adapters to the &Roll stroller frame and press until they click in place.
Listen for audible click.
Attach car seat adapters to upper risers
Attach infant car seat adapters (sold separately) to upper riser adapters.
Listen for audible click. Pull up to confirm secure connection.
Attach infant car seat (rear position)
Attach your infant car seat to upper risers in a rear-facing position until it clicks in place.
Listen for audible click. Pull on car seat handle to confirm secure connection.
Lower Switchback Seat (front position)
Lower Switchback Seat into lower post adapters until it clicks into place.
Place one child in the rear infant car seat before placing the second child in the front seat.
Listen for audible click. Pull up to confirm secure connection.
Important: Do not use the lower seating position with a second seat, infant car seat, or bassinet until the upper seating (rear) position is occupied.
To remove Switchback Seat
Press seat hub buttons to release, then lift to remove.
To remove double seat adapters
Press on either side of upper risers to release, then lift to remove.
Double Mode with Two Car Seats
+−
Use this configuration to attach two infant car seats — one in the rear (upper) position and one in the front (lower) position. Each car seat requires its own brand-specific adapter (sold separately). Always secure the &Roll Stroller Frame before attaching any components.
Secure &Roll Stroller Frame
Press gently on the brake pedal to lock the rear wheels before attaching any components.
Green indicator = unlocked. Red = locked.
Car seat preparation — raise handle
For Nuna, Maxi-Cosi, Graco, Baby Jogger, Peg Perego, and UPPAbaby infant car seats, press height adjuster buttons to lift the handle to its highest position.
Listen for audible click.
Car seat preparation — lower handle
For Britax, Cybex (not compatible with Cloud Q), Clek, and Chicco infant car seats, press height adjuster buttons to lower the handle to its lowest position.
Listen for audible click.
Attach second set of car seat adapters
Attach a second set of infant car seat adapters (sold separately) to the &Roll stroller frame. Press until adapters click in place.
Listen for audible click. Pull up to confirm secure connection. Green = locked.
Attach second infant car seat (front position)
Attach a second infant car seat to lower post adapters in a rear-facing position until it clicks in place.
Place one child in the rear infant car seat before placing the second child in the front infant car seat.
Listen for audible click. Pull on car seat handle to confirm secure connection.
Important: Do not use the lower seating position with a second seat, infant car seat, or bassinet until the upper seating (rear) position is occupied.
To remove double seat adapters
Press on either side of upper risers to release, then lift to remove.
Cleaning & general maintenance
+−
Routine cleaning
Wipe with a damp cloth and dry thoroughly. For a more thorough cleaning, rinse with a hose or hand wash with a mild detergent and dry thoroughly.
Do not use abrasives. Do not put in dishwasher.
Limited Warranty
+−
We've got you covered
This accessory is guaranteed to be free from any manufacturing defects for a period of 1 year from the date of purchase under normal use and in compliance with the operating instructions.
This warranty is not transferable and extends only to the original retail purchaser and is only valid when supplied with proof of purchase.
Please retain proof of purchase to activate this limited warranty.
The warranty is valid only in the original country of purchase and is subject to the conditions set out by the country in which the items were purchased. Conditions may vary. Veer will not ship replacement or repair parts out of the country of purchase.
Veer will provide replacement parts or conduct repairs if deemed appropriate by the company. Veer reserves the right to exchange an item for a replacement part. Some parts may be replaced with newer model parts as Switchback is improved over time.
What's not covered
A repair issue will not be covered by this warranty if:
- The issue is caused by misuse or improper/poor maintenance.
- Damage is corrosion, mold, or rust caused by a lack of maintenance or service.
- Damage is due to general wear and tear resulting from everyday use or negligence.
- Damage is caused by the intensity of the sun, sweat, detergents, damp storage, or frequent washing.
- Repairs or modifications are carried out by a third party.
- This Switchback accessory is purchased from an unauthorized retailer. Approved retailers are listed at goveer.com.
- This Switchback accessory is second-hand.
- This Switchback accessory is damaged as a result of an accident, airline, or freight damage.
Veer reserves the right to determine whether or not the terms and conditions of the warranty have been met. Please contact Veer with any warranty questions.
For full warranty details, visit goveer.com
Contact & support
Phone: 470-344-3200 · Email: [email protected]