All articles

Switchback Luxe Canopy Clamp ReplacementUpdated 23 days ago

REPAIR GUIDE

UPDATED JUNE 2024




Required Tools

  • #1 Phillips screwdriver or other rod tool with less than 3/16" diameter 




Kit Contents





Procedure

Note: Remove the Canopy from the Switchback Seat before starting.

/01:  Each canopy clamp has 2x access holes to a retention button on the inside of the clamps.


/02:  Use the tip of the screwdriver or rod tool to compress one of the retention buttons and slide the canopy bow bar out. 

/03:  Repeat with the other canopy bow bar.  



/04:  Replace old clamp with a new one by re-inserting each bow bar into their corresponding slot until they snap in. (Be mindful of the clamp orientation, the innermost mount is for the rear bow)





Was this article helpful?