Infant InsertUpdated 5 months ago
INFANT INSERT USER GUIDE
WARNING
NEVER LEAVE CHILDREN UNATTENDED. FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH:
The Infant Insert is suitable for infants from birth.
The wedge insert should be removed when infant reaches 3 months old or when they begin to sit upright in the seat.
NEVER allow infant to lie face down on this product or any padded material.
NEVER allow the use of this product or any product to interfere with proper function of child safety restraints, according to the manufacturer’s instructions.
For use with Veer Switchback Seat only.
Only use with infant seated with harness straps in place.
Not intended for use outside of Switchback Seat.
CLEANING & GENERAL MAINTENANCE
Wipe with a damp cloth and a mild detergent and dry thoroughly. DO NOT use abrasives. Infant Insert may also be removed for machine washing on gentle cycle in cold water with mild detergent. Dry flat and away from direct sunlight before re-use or storage. DO NOT bleach, iron or dry clean.
LIMITED WARRANTY
We’ve got you covered!
This accessory is guaranteed to be free from any manufacturing defects for a period of 1 year from the date of purchase under normal use and in compliance with the operating instructions.
This warranty is not transferable and extends only to the original retail purchaser and is only valid when supplied with proof of purchase.
PLEASE RETAIN PROOF OF PURCHASE TO ACTIVATE THIS LIMITED WARRANTY
The warranty is valid only in the original country of purchase. This warranty is subject to the conditions set out by the country in which the items were purchased. Conditions may vary. Veer will not ship replacement or repair parts out of the country of purchase.
Veer will provide replacement parts or conduct repairs if deemed appropriate by the company.
Veer reserves the right to exchange an item for a replacement part. Some parts may be replaced with newer model parts as Switchback is improved over time.
Please note that a repair issue will NOT be covered by this warranty if:
- The issue is caused by misuse or improper/poor maintenance. Please refer to this instruction booklet for guidance on use and Switchback assembly and use.
- Damage is corrosion, mold or rust caused by a lack of maintenance or service.
- Damage is due to general wear and tear, which is the result of everyday use or negligence.
- Damage is caused by the intensity of the sun, sweat, detergents, damp storage or frequent washing.
- Repairs or modifications are carried out by a third party.
- This Switchback accessory is purchased from an unauthorized retailer. Approved retailers are listed on our website at goveer.com.
- This Switchback accessory is second-hand.
- This Switchback accessory is damaged as a result of an accident, airline or freight damage.
Veer reserves the right to determine whether or not the terms and conditions of the warranty have been met. Please contact Veer should you have any questions regarding your warranty.
For full set of warranty details, visit goveer.com
USING YOUR SWITCHBACK INFANT INSERT
01. LOCK REAR WHEELS
Press gently on the brake pedal.
Green indicator=locked. Red=unlocked.
02. PLACE WEDGE IN SWITCHBACK SEAT
For infants, place wedge in Seat before adding Infant Insert.
03. ADD INFANT INSERT
Place Infant Insert in Seat and align slots with Seat bottom, waist and shoulder straps.
04. POSITION SEAT HARNESS
Pull Seat bottom, waist and lowest shoulder straps through Infant Insert slots, then adjust to fit comfortably.
05. INSTALL HEADREST
Slip straps on back of headrest around shoulder harness and snap tight to secure.
06. ADJUST HARNESS
Adjust buckles to fit your infant comfortably, then slide shoulder strap covers on.
07. REMOVE WEDGE
When your infant no longer needs the wedge, use upper Infant Insert harness slots.
08. REMOVE INFANT INSERT
Pull Seat bottom, waist and shoulder straps out through Infant Insert slots and remove Infant Insert.
P/N: D02052302