Infant Car Seat Adapter for Peg PeregoUpdated 5 days ago
First 5 minutes
New to the Infant Car Seat Adapter for Peg Perego®? Here's the fastest path to getting your infant safely seated on the Cruiser.
Removing the seat, switching adapter positions, cleaning, and warranty details can be found below.
Safety warnings
+−
Never leave your child unattended. Failure to follow these warnings and instructions could result in serious injury or death.
General safety
- Ensure that all locking devices are engaged before use.
- To avoid injury, ensure that your child is kept away when unfolding and folding this product.
- Do not let your child play with this product.
- Always use the restraint system.
- Check that the pram body, seat unit, or car seat attachment devices are correctly engaged before use.
- This product is not suitable for running or skating.
Infant car seat adapter safety
- Never use the infant car seat adapter as a handle to lift the Cruiser.
- Never place an infant in the car seat before you have firmly attached the seat to the Cruiser.
- Never remove the infant car seat from the Cruiser frame with an infant in the seat.
- Always verify the adapter is correctly installed onto the Cruiser before installing an infant car seat.
- Weight limitations: recommended only for infants within the height and weight limits of infant car seats specified in the infant car seat manual.
- Always use the infant car seat restraint system as recommended by the manufacturer.
Parts & replacement
Never use this product if there are any missing or broken parts. Contact Veer Gear for replacement parts and never use substitute parts.
Sleep safety
The Veer Cruiser with an infant seat attached does not replace a cot or a bed. Should your child need to sleep, place them in a suitable pram body, cot, or bed.
Using the adapter
+−
All assembly and use steps live here, in order. Always verify the adapter is correctly installed on the Cruiser before placing an infant car seat on it, and never attach or remove the adapter or seat with an infant in the seat.
Will my car seat fit?
This adapter is designed for Peg Perego® infant car seats. If you have a seat from another brand — such as Cybex®, Maxi-Cosi®, Nuna®, Clek®, Graco®, Britax®, UPPAbaby®, or Chicco® — you'll need a different Veer adapter.
Not sure about your exact model? Check the compatibility chart at goveer.com or email [email protected] with your car seat's make and model before installing.
Looking to use two car seats?
This adapter holds one infant car seat on the Cruiser. Running a second car seat on a 2-seat Cruiser uses a separate second-seat adapter — it's a different product. If you're unsure which adapter you need, contact [email protected].
Assemble adapter
Assemble the adapter components as shown.
Lock brake
Engage the Cruiser's brake before attaching or removing the adapter or infant car seat.
Adapter can be attached in 4 positions
The adapter comes preassembled for positions A & D. If you wish to install your infant seat in positions B or C, see steps 10–12 below.
Attach adapter — place over pins
Place the adapter over the highlighted pins on the Cruiser frame.
Attach adapter — orientate it
Orientate the adapter so the gray dots face the seat back, and place the adapter on the Cruiser sidewalls between the stitch lines.
Attach adapter — latch it in place
Position the latch bar under the top rail and pull the latch up until it clicks into place.
✓ Green indicator = correctly installed. Red indicator = incorrectly installed — do not use.
Seeing red, or the latch won't lock? Lift the latch, re-seat the adapter over the pins, and pull up again until the indicator turns green. Never place a car seat on an adapter showing red.
Never place an infant in the car seat before you have firmly attached the seat to the Cruiser.
Always verify the adapter is correctly installed onto the Cruiser before installing an infant car seat.
Attach infant car seat
Lower the infant car seat onto the adapter until it locks and you hear a "SNAP."
✓ Confirm the seat is firmly locked before placing an infant in the seat.
Never remove the infant car seat from the Cruiser frame with an infant in the seat.
Remove infant car seat
Pull the release latch and lift the infant car seat to release it from the adapter.
The release handle is on the car seat itself, not the adapter — check your Peg Perego® seat's manual if you can't locate it. The adapter stays attached to the Cruiser when you lift the seat off.
Remove adapter
Release the latches and remove the adapter from the Cruiser.
Warning: never attach or remove the adapter with an infant in the seat.
Switch adapter to positions B & C
Remove the screws from the bases.
Positions A and D need no tools — only B and C require this step. Keep the screws somewhere safe; you'll reattach them in step 12. Missing or lost screws? Contact [email protected] for replacements.
Switch adapter to positions B & C
Reverse the top.
Switch adapter to positions B & C
Reattach the screws to secure the adapter in its new position.
Cleaning & general maintenance
+−
Routine cleaning
Wipe with a damp cloth and dry thoroughly.
Thorough cleaning
For a more thorough cleaning, rinse with a hose or hand wash with a mild detergent and dry thoroughly.
- Do not use abrasives.
- Do not put in dishwasher.
Limited warranty
+−
We've got you covered
This accessory is guaranteed to be free from any manufacturing defects for a period of 1 year from the date of purchase under normal use and in compliance with the operating instructions.
This warranty is not transferable and extends only to the original retail purchaser, and is only valid when supplied with proof of purchase.
Please retain proof of purchase for this limited warranty.
Coverage details
The warranty is valid only in the original country of purchase and is subject to the conditions set out by that country. Conditions may vary. Veer will not ship replacement or repair parts out of the country of purchase.
Veer will provide replacement parts or conduct repairs if deemed appropriate by the company. Veer reserves the right to exchange an item for a replacement part. Some parts may be replaced with newer model parts as the Cruiser is improved over time.
What's not covered
A repair issue will not be covered by this warranty if:
- The issue is caused by misuse or improper / poor maintenance. Please refer to this instruction booklet for guidance on use and maintenance.
- Damage is caused by improper installation of Veer parts and/or accessories. Please refer to this instruction booklet for guidance on Cruiser assembly and use.
- Damage is corrosion, mold, or rust caused by a lack of maintenance or service.
- Damage is due to general wear and tear from everyday use or negligence.
- Damage is caused by sun intensity, sweat, detergents, damp storage, or frequent washing.
- Repairs or modifications are carried out by a third party.
- The Cruiser is purchased from an unauthorized retailer. Approved retailers are listed at goveer.com.
- The Cruiser is second-hand.
- The Cruiser is damaged as a result of an accident, airline, or freight damage.
Veer reserves the right to determine whether the terms and conditions of the warranty have been met. For full warranty details, visit goveer.com.
Need help? Email [email protected].