How do I install the Garage Hanger from Veer?Updated 2 hours ago

It's a quick, one-person job with a drill and extra-long drill bit, Phillips screwdriver and a level.

Mark a level line on the wall, high enough that your folded frame will hang clear of the floor, and space the two hangers about 12 to 14 inches apart along it. Pre-drill two holes for each hanger. Where a hanger lines up with a wall stud, screw straight into it; where it doesn't, set a drywall anchor (not included) in each hole first. Secure each hanger with two of the four included screws, and give each one a firm tug to make sure it's tight. Then hang your folded frame—Cruiser and Hauler by the large-wheel axle, Switchback by the handle.