&Jog / &Roll Storage Latch ReplacementUpdated 6 months ago
REPAIR GUIDE
UPDATED MARCH 2024
Required Tools
- Flat head screwdriver
- Rubber mallet
Kit Contents
- 4mm hex wrench (x2)
- Storage Latch
- Storage Latch Mount Cover
- Storage Latch Bolt Cover
Procedure
/01: Pry the bolt cover from the mount cover using the flat head screwdriver.
/02: Remove the bolt using the included hex wrenches. Set aside in a safe place.
/03: Remove the storage latch.
/04: Pull the shock away from the frame and remove the mount cover.
/05: Reverse the steps to install the new storage latch. Use a rubber mallet to install the bolt cover into the mount cover.