&Jog / &Roll Lower Front Frame ReplacementUpdated a month ago
REPAIR GUIDE
UPDATED AUGUST 2024
Required Tools
- 4mm hex wrench (x2)
Kit Contents
A. Front Leg Assembly (&Jog / &Roll)
Procedure
/01: Remove the front edge of the basket by releasing the velcro straps and slipping them off the frame.
It may be easier to do this repair with all wheels removed.
/02: Using the two hex wrenches, remove the binding bolts that secure each front leg to the frame. IMPORTANT: Set the binding bolts aside and note that one is shorter than the other. They will be used again during re-assembly.
/03: Separate the frame from the leg by spanning them apart. When doing so on the second side be careful and support the frame to prevent it from falling. Remove the plastic piece that's on the frame.
/04: Remove the lower front frame. It helps to try to shimmy each side at the same time.
/05: Install the new front frame by repeating steps in reverse order. Again, it helps to shimmy both sides at the same time so that the frame does not buckle going into its mounts.
/06: Be mindful of the orientation of this plastic piece and the alignment square.
/07: Be mindful of the side in which the barrel bolt is inserted.
REPAIR COMPLETE!