&Chill Camp ChairUpdated 4 days ago
First 5 minutes
New to the &Chill Camp Chair? Here's the fastest path from box to sitting outside.
Safety Warnings
+−
Never leave children unattended. Failure to follow these warnings and instructions could result in serious injury or death.
- This product is for use with the Veer Switchback Seat only.
- Always ensure all frame connections are fully locked before sitting in the chair.
- Do not exceed the maximum weight capacity.
- Never use this product if any part is damaged, cracked, or bent.
- Do not use on uneven or unstable surfaces.
- Do not allow children to climb on or hang from the chair frame.
- Always keep the chair away from open flames and high heat sources.
Assembly & setup
- Inspect all frame connections and locking mechanisms before each use.
- Ensure the center connector is fully clicked and locked before adding the seat or sitting.
- Do not force any joint that does not click smoothly into place — inspect for damage or obstruction.
Use & environment
- Do not use near water, pools, or other bodies of water.
- Do not leave the assembled chair unattended in high winds.
- Do not modify or attempt to repair any part of the frame.
- Do not use replacement parts that are not approved by Veer.
- Store away from direct sunlight when not in use to extend the life of the seat fabric.
Using your Switchback &Chill Camp Chair
+−
Follow these steps to assemble and use your &Chill Camp Chair. Steps A and B are for initial assembly only — you only need to complete them once.
Assemble the left frame — First time only
Locate the left and right frame halves and the center hinge connector. Align the left frame arm with the center connector and insert the hinge pin until it clicks firmly into place.
Steps A and B only need to be completed once during initial setup.
Assemble the right frame — First time only
Repeat on the right side. Insert the right frame arm into the center connector until the hinge pin clicks firmly into place. Both arms should be fully and evenly seated before use.
✓ Both frame arms should sit level with no wobble when fully seated.
Set up assembled frames
Open the assembled camp chair frame outward until all joints are fully extended. The legs should spread evenly and lock open in the upright position.
✓ All four legs should be firmly planted on the ground with the frame standing on its own.
Connect right and left frames
Press the right and left frame halves together at the center connector until you hear and feel a firm click. Give the frame a gentle shake to confirm it is securely connected before adding the seat.
✓ Frame halves should have no gap and resist separation with a gentle pull.
Add Switchback seat
Drape the Switchback seat over the camp chair frame, aligning the seat attachment loops with the frame bars. Pull the seat downward on both sides until it sits taut and fully engaged on the frame.
✓ The seat fabric should be evenly tensioned across the frame with no bunching.
The Switchback seat works across the full Veer system. Once you're done with the &Chill, it moves seamlessly to the &Roll, &Jog, and &Bike mount — no extra tools needed.
Recline seat
Locate the recline adjustment on the rear of the frame. Pull the recline lever and tilt the seatback to your preferred angle, then release to lock into position.
Available recline positions allow for an upright seated position as well as a relaxed recline.
Always ensure the recline is locked before sitting in the chair.
Prepare for storage (Part 1)
Press the seat hub buttons to release, then lift the Switchback seat off the frame. Next, press the button under the center support bar to disconnect the right and left frames from each other.
Prepare for storage (Part 2)
Slide the bushings off the frame joints to separate each piece. Fold the legs and support bar flat, then slide everything back into the &Chill storage bag.
Ensure the frame is completely dry before folding and storing to prevent corrosion or mold.
Cleaning & general maintenance
+−
Routine cleaning
Wipe the frame and all metal components with a soft, damp cloth. Use a mild soap solution for stubborn dirt or stains. Rinse with clean water and dry thoroughly before folding or storing.
Do not use abrasive cleaners, bleach, or solvents on any part of the chair.
Switchback seat fabric
The Switchback seat may be removed and wiped clean with a damp cloth and mild detergent. Dry thoroughly before reattaching or storing.
For machine washing instructions, refer to the Switchback Seat user guide.
Frame joints & hinges
Periodically inspect all joints, hinges, and locking mechanisms for signs of wear, corrosion, or damage. Clean joints with a damp cloth to remove debris. Do not apply lubricants unless specified by Veer.
Storage
Before storing, ensure the chair frame and seat are completely clean and dry. Fold the frame flat and store in a cool, dry location away from direct sunlight and moisture. Prolonged exposure to UV light or damp conditions can degrade materials over time.
Limited warranty
+−
We've got you covered
Your &Chill Camp Chair is guaranteed to be free from any manufacturing defects for a period of 1 year from the date of purchase under normal use and in compliance with the operating instructions.
This warranty is not transferable and extends only to the original retail purchaser, and is only valid when supplied with proof of purchase.
Please retain proof of purchase to activate this limited warranty.
The warranty is valid only in the original country of purchase and is subject to the conditions set out by that country. Conditions may vary. Veer will not ship replacement or repair parts out of the country of purchase.
Veer will provide replacement parts or conduct repairs if deemed appropriate by the company. Veer reserves the right to exchange an item for a replacement part. Some parts may be replaced with newer model parts as the &Chill Camp Chair is improved over time.
What's not covered
A repair issue will not be covered by this warranty if:
- The issue is caused by misuse or improper / poor maintenance.
- Damage is caused by improper assembly or installation of Veer parts and/or accessories.
- Damage is corrosion, mold, or rust caused by a lack of maintenance or service.
- Damage is due to general wear and tear from everyday use or negligence.
- Damage is caused by sun intensity, sweat, detergents, damp storage, or frequent washing.
- Repairs or modifications are carried out by a third party.
- The &Chill Camp Chair is purchased from an unauthorized retailer. Approved retailers are listed at goveer.com.
- The &Chill Camp Chair is second-hand.
- The &Chill Camp Chair is damaged as a result of an accident, airline, or freight damage.
Veer reserves the right to determine whether the terms and conditions of the warranty have been met. For full warranty details, visit goveer.com.
Need help? Email [email protected] or call 470-344-3200.