All articles

Switchback Seat Calf Support Bungee ReplacementUpdated 2 months ago

REPAIR GUIDE

Switchback Seat Calf Support Bungee Replacement

UPDATED MARCH 2024




Required Tools


  • Small flat head screwdriver
  • Phillips screwdriver




Procedure


/01:  Remove the screw and washer using a Phillips Screwdriver. Set the screw and washer aside in a safe place.



/02:  Use the flat head screwdriver to pry the remaining bungee out.



/03:  Pull the bungee out.



/04:  Push the new bungee through the hole. It is helpful to remove the screw from the opposite side in order to have better access to the hole.



/05:  Lift the calf support plate so that it is contacting the calf support tube. Wrap the first end of the bungee around the screw boss. Then wrap the second end of the bungee around the screw boss.


/06: Replace the washer and screw.



/07: Tighten the screw using the Phillips Screwdriver. ENSURE THE BUNGEE DOES NOT GET PINCHED BETWEEN THE WASHER AND THE PLASTIC.




Was this article helpful?
Yes
No