Cruiser Seat Back Replacement InstructionsUpdated 5 months ago
REPAIR GUIDE
UPDATED FEBRUARY 2022
Tools Required
- 4mm Hex Wrench
Replacement Parts Required
- Seat Back
- 2x Pivot Bolts
PROCEDURE
/01: Using a 4mm hex wrench, remove the bolts at the bottom of the seat back, on each side.
/02: Remove the waist harnesses from each side of the old seat back by fishing the end of the harness webbing through the buckles. Once the buckles are freed, the harness is able to be removed through the back of the seat back.
/03: Install the new seat back and reinstall webbing by following the reverse process of Steps 1 and 2.