Cruiser Canopy Clamp ReplacementUpdated 9 months ago
REPAIR GUIDE
UPDATED FEBRUARY 2022
Required Tools
- #1 Phillips screwdriver or other rod tool with less than 3/16" diameter
Kit Contents
- 2x Cruiser canopy clamps (Left and Right)
Procedure
Note: Remove the Canopy from the Switchback Seat before starting.
/01: Unsnap Canopy from Canopy pivot.
/02: Use the tip of the screwdriver to compress the retention button and slide the Canopy clamp out of the Canopy bow tube.
/03: Slide new Canopy clamp into the Canopy bow tube.
/04: Re-snap Canopy fabric onto Canopy pivot.